Gutta Percha Obturation System, The full name hot melt tooth gum filling system is an instrument that injects softened and molten tooth gum into the root canal after heating to replace the traditional cold side pressure filling. Because it can quickly and accurately and dense three-dimensional root canal filling, it is widely praised by doctors, and it will definitely bring a revolutionary impact on root canal filling.Features of Gutta Percha Obturation System1 More efficient, safer, faster and more complete root canal filling system.2 Fast and accurate filling.3 Three-dimensional filling can make the root canal more closed.4 Flexible filling method.5 Perfect vertex control and complete filling of the entire root canal (including filling of root canal branches).6 Two-in-one system makes filling easier and more convenient.7 Compressible tooth gel makes the filling compact.8 Digital display of temperature adjustment makes temperature adjustment more convenient.9 Compressed gum tips are more compact.10 Friendly operation interface design.11 The machine is more compact and more ergonomic.12 The technology is simple and easy to learn.Instructions of Gutta Percha Obturation System1. Select the heating pen tip, the taper of the heating pen tip is the same as that of the main tooth tip. The heating pen tip is placed at a locking point in the root canal, and the locking point is about 5 mm away from the physiological root tip hole. Adjust the rubber tip of the heating pen tip to the highest reference point on the maxillofacial surface. The heating pen tip can be slightly pre-bent to adapt to the curved root canal.2. Dry the root canal, cut the tip of the main tooth gum tip with a working length of 0.5mm, and apply a thin layer of root canal sealant to the root canal wall3. Use a heated pen tip to burn off the gum tip at the root canal mouth4. Use a large vertical pressurizer to pressurize the root canal to the root5. Place the tip of the heating pen on the gum tip of the root canal, touch the heating switch, and pressurize the root at the same time. Press the tip of the heating pen to 3mm~4mm above the locking point, release the heating switch, stop heating for 10 seconds and take it out in 1 second6. Continue to apply pressure to the root, press the heating pen tip to 1mm from the locking point7. Continue to pressurize for 10 seconds to prevent shrinkage of the gum when it becomes hot and cold8. While continuing to pressurize the root, touch the heating switch for 1 second, release the heating switch, and after a pause of 1 second, quickly pull out the tip of the heating pen out of the root canal. (Note: Two-thirds of the gum in the root canal will be taken out of the root canal by the heated pen tip)9. After pulling out the heating nib, use a vertical press to quickly compact the gum at the apex10. Fill the root tip 1/3, then use a heat gun to inject glue to fill the back 2/3 of the root canal11. Insert the dental glue injection needle into the root canal, and make the dental glue injection needle contact with the dental glue at 1/3 of the root apex.12. Inject dental glue under pressure. Move slowly to the crown and maintain the reverse thrust to help prevent the formation of bubbles. Every time a certain amount of tooth gum is injected, it is immediately compacted with a suitable vertical pressurizer, and finally the tooth gum is injected and filled into the root canal mouth, and the tooth gum is injected into the root canal mouth, and immediately a large vertical pressurizer is used in the Compacted.

The root canal therapy instrument is also called a root canal motor. It is a precision electronic instrument designed to reduce the work intensity of the doctor, replace the manual enlargement of the root canal, improve efficiency and save time, and prepare a more standard root canal.The dental root canal treatment instrument belongs to the medical instrument of stomatology, which consists of two parts: the irrigating device and the suction device. The flushing device allows the pressurized air to enter the flushing head through the pump, air storage tank and flow regulating valve. The suction device draws out the necrotic tissue in the root canal through the filter, vacuum, shut-off valve, exhaust valve, flow regulating valve, suction head. The suction head is a key part of the instrument. It consists of elastic contacts, stainless steel needle tubes and handles. The elastic contacts can be made into wedges. The instrument combines irrigation and suction, which can safely and quickly extract the necrotic substances in the root canal of the teeth, so that the teeth can be treated smoothly.According to the working principle of the root canal therapy instrument can be divided into: ultrasonic root canal therapy instrument and microscope root canal therapy instrument.1. Ultrasonic Root Canal Therapeutic ApparatusThe ultrasonic root canal treatment instrument is composed of an ultrasonic emission system and an irrigation system. It has two cleaning methods, chemical and mechanical. The "cavitation" effect of ultrasonic waves can greatly enhance the antibacterial effect of the irrigation solution, which can necrosis in the root canal. Tissue and toxins are flushed out. Its working principle is to use the ultrasonic launch system to make the expansion needle (as shown in the figure) vibrate three-dimensionally, plus the liquid spray system for root canal preparation.The advantages of the ultrasonic root canal therapy instrument are: the ultrasonic technology has biological effects, mechanical effects, thermal effects and cavitation phenomena that combine the above three functions, and can effectively kill various bacteria in the root canal. Ultrasonic root canal preparation has good continuous irrigation, which can timely remove necrotic tissue debris in the root canal, effectively reduce the amount of bacteria in the root canal, and avoid the piston action of the instrument in the infected root canal. So that the infected material in the root canal is not easy to exceed the root apex. Due to the vibration of the ultrasonic file itself, it is less laborious to twist and pull with your fingers. It only needs to do the lifting and inserting movement instead of the rotating movement, so the breaking rate of the device and the accident rate of the device falling into the mouth of the patient and being swallowed by accident are greatly reduced. Thanks to the liquid spraying device, there is no need to stop for flushing, saving operation time.2. Microscope root canal therapy instrumentMicroscope root canal therapy instrument is a combination of microscope technology and medical technology. It can clearly observe the tooth anatomy and root canal morphology. Whether it is conventional root canal therapy or apical microsurgery, it can allow doctors to protect the normal tissues of patients, thereby improving the success rate of treatment, shortening the healing time, and reducing pain. , The postoperative wound is smaller.Features1. Built-in rechargeable battery, easy to operate. Battery power display (displays the power of the built-in battery, flashes when charging), torque display (displays the torque when the electric motor is working), speed display (100~625r/min) The speed of each gear increases or decreases by 25r/min.2. This machine has a variety of memory functions, doctors can set different torque and speed according to different types of expansion needles, easy to operate.3. In the process of expanding the root canal, after the expansion needle torque exceeds the set value, in order to prevent side penetration and needle breakage, the electric motor will automatically reverse, and the doctor can also adjust the manual turning of the machine according to the actual situation.4. The machine adopts a large LCD screen display, which can intuitively see the operation of the machine on the screen.5. In order to reduce the financial burden on the doctor and better sterilize the problem, use a 1:1 low-speed bending head.Precautions for use1. To control the torque and speed, it is best to set the torque control motor and the matching speed. Following the torque recommended by the expanded needle manufacturer, speed is particularly important for treatment safety.2. Measure the length of the instrument each time it enters the root canal. Longer instruments increase the risk of twisting and breaking. Equipped with root canal length measuring instrument, caliper, etc. for working length measurement.3. Correct operation is very important: do not apply pressure and force on the tip. The instrument should not stay in the root canal for too long.4. The breakage of the instrument mostly occurs in molars, especially in the narrow and narrow root canals such as the upper canal and mandibular molars. The mesial root canal should be treated with great care before treatment.5. Curved root canals, re-treatment and calcified root canals require special equipment and techniques, and it is best to use a new expansion needle.6. Establish a straight path to maintain a smooth root canal, pay attention to gestures during operation, and try to ensure that the expansion needle and the root canal path are in line to reduce the bending resistance of the expansion needle in the crown and the stress on the instrument.7. The root canal should be kept sufficiently lubricated and rinsed every time it is prepared.8. Because the internal root canal is narrow, do not apply pressure to the expansion needle during operation. The cutting should be completed solely by the strength of the machine itself and the sharp edge of the expansion needle.9. In the case of insufficient experience, it is safest to use the recommended minimum torque. Generally speaking, lower speed will extend the clinical life of the device and reduce the chance of breaking.10. Choose a good expansion needle and control the number of times of use: when using it, you should observe whether there is wire drawing or deformation. If you find something, you must discard it in time, otherwise you will regret it.11. After each use, it is best to record the number of uses to prevent fatigue of the instrument; the debris of the expanded needle edge should be cleaned repeatedly in time and equipped with a cleaning table.

1. 360° start/stop ring2.Heating via 0.2s for 200℃3..Contine using 5h at 200℃4.2000mAh batteries make it more portableEasy operation1.Select appropriate heated plugger according to the root canal.2.Long press the power button to start the machine3.Press the power button and setting required temperature4.360° activation switch to heating5.Shut down after operation

Principle of apex locator operation Micro signals consisting of dual frequencies sent from the unit return to the unit after travelling along the electronic circuit that is composed of: unit-probe cord-file holder-file-patient-lip holder-probe cord. The impedance of the electric circuit may be changed depending on the distance between the end of a file and the apex of the root canal, which results in a change in the micro signals that are input back into the unit.The microprocessor of the unit calculates the change in micro signals to convert the difference into a distance value,which will be displayed on the FreePex LCD display.Dental Multi-frequency High Accuracy Apex Locator-TieApexPlease click: https://www.denjoy.cn/dental-multi-frequency-high-accuracy-apex-locator-tieapex.htmlMini And Accurate Apex Locator With Breathing Light-iFivePlease click: https://www.denjoy.cn/mini-and-accurate-apex-locator-with-breathing-light-ifive.html